MDVACM Squad (Maryland and Virginia)

[Stheman]

damn! all this crazy talk has got me thinking again! engine build?!? After the s/c is done perhaps a resleeved k26 stroker and ill just use my k20z3 head,..

ahhh craziness!
and now begins

THE HORSEPOWER WARS!!

Horsepower wars now LMAO. Well I been on the look out for an eaton M90 on ebay once I find one I will be buying it so I have it on hand after paul finishes the kit. Going to be running 8 to 10 lbs of boost.

RYAN how much did NEXXON charge you for the gunge pods.

[Stheman]

I have no secretes lol....Finally got around to buying rear camber kit today. Also on the look out for NEX GT coils for my car like Paul has on his car but, currently there isn't any on ebay....Also I'm going to paint the bell moldings, window moldings, and door pillars gloss black Before the summer is out so I won't have the ugly vinyl that always peals on there anymore.

[BliNx197]

steve we all know you gotta beast under ya hood! can't wait to see you enjoying your bomb once its done!
but I was just thinking how far this squad has come from 5 roughly modified CMs meeting in a movie theater parking lot to now with 15+ members and people doing serious engine mods,...

but Ryann I wanted to know how much those gauges costed you too, although I wanted a gauge pod, not gunge either way let us know!!

[Stheman]

steve we all know you gotta beast under ya hood! can't wait to see you enjoying your bomb once its done!
but I was just thinking how far this squad has come from 5 roughly modified CMs meeting in a movie theater parking lot to now with 15+ members and people doing serious engine mods,...

but Ryann I wanted to know how much those gauges costed you too, although I wanted a gauge pod, not gunge either way let us know!!

Not a bomb.... motor is built for it. Forged piston, rods and crank FTW. B

BTW Blinx what kind of clutch are you going to get. I know the after market clutches for the J's are expensive as hell I paid close to $800 for mine.

[Anonymous]

RYAN how much did NEXXON charge you for the gunge pods.

but Ryann I wanted to know how much those gauges costed you too, although I wanted a gauge pod, not gunge either way let us know!!

I know I bought it together from a member in V6P that had plans with his AV6 in Pauls hands, but unfortunately got into a bind on his part. The TL-S Cams, Ported Heads, Gauges, Pod, Jpipe, Test pipe were all purchased together. So I'm not sure how much the gauge pod cost individually. I would suggest to contact Nexson in V6P and ask him how much he did this for the member "SickV6" in which he is the original owner of these.

[Tremmor]

WOOT! JUST GOT MY GREDDY EVO2 CAT BACK AND DC SPORTS HEADERS ON LAYAWAY FROM NAM! TOTAL COST.......$950 FOR BOTH!

now i just need the TSX intake man from blinx!

[Tremmor]

Hey steve, where are you located so i can get an estimate on my paint work?  I've also noticed that sombody must have bumped my rear bumper and put a nice vertical crack in it.  DAMN!!!!! so now i need to replace the bumper

[Anonymous]

WOOT! JUST GOT MY GREDDY EVO2 CAT BACK AND DC SPORTS HEADERS ON LAYAWAY FROM NAM! TOTAL COST.......$950 FOR BOTH!

now i just need the TSX intake man from blinx!

from where you got it again? and when are you going to get all this installed?

[Tremmor]

WOOT! JUST GOT MY GREDDY EVO2 CAT BACK AND DC SPORTS HEADERS ON LAYAWAY FROM NAM! TOTAL COST.......$950 FOR BOTH!

now i just need the TSX intake man from blinx!

from where you got it again? and when are you going to get all this installed?

I got em from the guy in mike secca's thread, not sure when they'll get installed, all depends on how fast i can pay it off

[Anonymous]

WOOT! JUST GOT MY GREDDY EVO2 CAT BACK AND DC SPORTS HEADERS ON LAYAWAY FROM NAM! TOTAL COST.......$950 FOR BOTH!

now i just need the TSX intake man from blinx!

from where you got it again? and when are you going to get all this installed?

I got em from the guy in mike secca's thread, not sure when they'll get installed, all depends on how fast i can pay it off

wow....

should be worth it though when its all paid off.

[BliNx197]

Thanks Ryann Ill just have Paul contact Nexson or maybe speak with a local shop about Fiberglassing my pods, prolly nexson tho! Wait I just reread that, your gonna be running a test pipe? Is that different lingo for Js? or are you gonna be unrestricted?! Risky! and yea all that other stuff should give you very nice gains! Cant wait to see it!..

BTW I talked to the guy from Ptuning I told him Id send you all his way depending on how my Session goes, where are you getting it tuned at? and I assume w/ a FIC

Steve Im keeping the stock clutch until I up the boost. The stock clutch was replaced when the transmission conked out so its got about 10k miles on it now, should be good for another 3-5 months. Either way prolly gonna go with the RSX-S flywheel w/ an ACT or Competition Stg 2 Dont wanna have too few pucks so Ill stick with a disc

Travis nice work! The car is gonna come along nicely! Only gonna need pulleys and a Ingalls Torque Dampener and you'll have most of the typical bolt ons, BTW it'll be $50 for the manifold since its technically not for your ride and you'll have to modify it.

Happy Modding folks!

[Anonymous]

Thanks Ryann Ill just have Paul contact Nexson or maybe speak with a local shop about Fiberglassing my pods, prolly nexson tho! Wait I just reread that, your gonna be running a test pipe? Is that different lingo for Js? or are you gonna be unrestricted?! Risky! and yea all that other stuff should give you very nice gains! Cant wait to see it!..

well I can ask him next time I see him online on AIM. I got my test pipe installed along with my Jpipe back in August 2008. I'm gonna get mine dynoed @ Ptuning either way since they are very professional and had good experiences the few times I have went there. Mines gonna be a pretty intresting dyno because of my single exhaust setup, just because I haven't seen on any major forum dynoed their car with that kind of exhaust.

[Tremmor]

Thanks Ryann Ill just have Paul contact Nexson or maybe speak with a local shop about Fiberglassing my pods, prolly nexson tho! Wait I just reread that, your gonna be running a test pipe? Is that different lingo for Js? or are you gonna be unrestricted?! Risky! and yea all that other stuff should give you very nice gains! Cant wait to see it!..

BTW I talked to the guy from Ptuning I told him Id send you all his way depending on how my Session goes, where are you getting it tuned at? and I assume w/ a FIC

Steve Im keeping the stock clutch until I up the boost. The stock clutch was replaced when the transmission conked out so its got about 10k miles on it now, should be good for another 3-5 months. Either way prolly gonna go with the RSX-S flywheel w/ an ACT or Competition Stg 2 Dont wanna have too few pucks so Ill stick with a disc

Travis nice work! The car is gonna come along nicely! Only gonna need pulleys and a Ingalls Torque Dampener and you'll have most of the typical bolt ons, BTW it'll be $50 for the manifold since its technically not for your ride and you'll have to modify it.

Happy Modding folks!

Sweet beans dude!

BTW- i'm cancelling the layaway thing as i have found the parts cheaper elsewhere.  I'm just gonna have to save some cash and it'll probably be faster anyways

[Anonymous]

BTW- i'm cancelling the layaway thing as i have found the parts cheaper elsewhere.  I'm just gonna have to save some cash and it'll probably be faster anyways

good decision. I would rather receive the items and have them installed while paying for them monthly, rather than just waiting to pay it off then have them send it to me. For me, I would appreciate what I would be paying for.

[mr_smc12]

tremmor i have a Neuspeed strut bar collecting dust at my crib. Its yourz if you want it. 50 bucks.