MDVACM Squad (Maryland and Virginia)

[NVA-AV6]

i had a funny feeling Paul may be able to do it. I've got my magnaflows and headers, but i need a resonator. Paul, you just do the piping and mount everything up correct? should i also grab a new cat while im at it?

derrick what resonator did you get? part number wise.

Get the resonator Derrick got, thats the one I use as far as the cat, I usually leave the stock cat in place and use a Vibrant 2.5" 3 bolt SS flange. If you want to replace the stock cat we can, but I like to use flanges and keep the cat a replaceable piece.

What I do is take raw SS mandrel bends,stright pipe and 1/2" SS round bar, cut and weld it together, basically a full custom fabrication.

Here is where I get my fabrication parts from, they are in Deleware so the stuff normally arrives next day.

[Bobsk24]

got pulled over again for tint

[Abailey4]

yeah that's the one im going to end up getting. thanks

derrick do you have an ETD?

I have one but it's not on the car. Probably gonna sell it.  It's been sitting at Pauls house for like a year now.  I got a Nrg one that was on another member's car before they made em for the 7th gen 4 cyl's.  So I was gonna have Paul make me a custom bracket just like on the Ingalls ones that are being produced now.

got pulled over again for tint

Now you and Blinx realize why the tint on our car is so light. Because in MD you cant just pay the fine and be done with it.  You actually have to have the tint removed, get it inspected by the state trooper or dmv and then put it back on again. That got old after the 4th time so we decided to just go legal when we moved to VA, well kinda close to legal(35 on the sides and 20 on the rear).

[NVA-AV6]

yeah that's the one im going to end up getting. thanks

derrick do you have an ETD?

I have one but it's not on the car. Probably gonna sell it.  It's been sitting at Pauls house for like a year now.  I got a Nrg one that was on another member's car before they made em for the 7th gen 4 cyl's.  So I was gonna have Paul make me a custom bracket just like on the Ingalls ones that are being produced now.


And you still have not come back to get that done

[Bobsk24]

Derrick,  Didnt you still get a ticket for having 35%  The cop actually let me go cause I told him I just got pulled over last week.  He put the machine on my window and I was like "Watch, it's gonna be at 11% "   He was cool and Hawaiin and he let me go cause I had that hawaiin head hanging from my rear view and cause my driving record was good!  My tint will never be legal!!!!!!!!!!!!!!!!  I will change the laws!

[Anonymous]

Derrick,  Didnt you still get a ticket for having 35%  The cop actually let me go cause I told him I just got pulled over last week.  He put the machine on my window and I was like "Watch, it's gonna be at 11% "   He was cool and Hawaiin and he let me go cause I had that hawaiin head hanging from my rear view and cause my driving record was good!  My tint will never be legal!!!!!!!!!!!!!!!!  I will change the laws!

How so?

and what kind of 360 games do you like?

[Bobsk24]

I like all kinds of 360 games....any cool shooters?

[rjp6262]

i had a funny feeling Paul may be able to do it. I've got my magnaflows and headers, but i need a resonator. Paul, you just do the piping and mount everything up correct? should i also grab a new cat while im at it?

derrick what resonator did you get? part number wise.

Get the resonator Derrick got, thats the one I use as far as the cat, I usually leave the stock cat in place and use a Vibrant 2.5" 3 bolt SS flange. If you want to replace the stock cat we can, but I like to use flanges and keep the cat a replaceable piece.

What I do is take raw SS mandrel bends,stright pipe and 1/2" SS round bar, cut and weld it together, basically a full custom fabrication.

Here is where I get my fabrication parts from, they are in Deleware so the stuff normally arrives next day.

i'll get the resonator, (ordering it tonight actually) what size piping do you have, or would you just order the piping i want?

[Anonymous]

I like all kinds of 360 games....any cool shooters?

I have call of duty 2 and call of duty modern warfare. And for 3rd person type of shooters, I have gears of war 1 and 2.

[BliNx197]

yeah that's the one im going to end up getting. thanks

derrick do you have an ETD?

Ive got the Ingalls one if you wanna know something, Paul made me a bracket for it too

[NVA-AV6]

i had a funny feeling Paul may be able to do it. I've got my magnaflows and headers, but i need a resonator. Paul, you just do the piping and mount everything up correct? should i also grab a new cat while im at it?

derrick what resonator did you get? part number wise.

Get the resonator Derrick got, thats the one I use as far as the cat, I usually leave the stock cat in place and use a Vibrant 2.5" 3 bolt SS flange. If you want to replace the stock cat we can, but I like to use flanges and keep the cat a replaceable piece.

What I do is take raw SS mandrel bends,stright pipe and 1/2" SS round bar, cut and weld it together, basically a full custom fabrication.

Here is where I get my fabrication parts from, they are in Deleware so the stuff normally arrives next day.

i'll get the resonator, (ordering it tonight actually) what size piping do you have, or would you just order the piping i want?

I just order it for the build, but I already have the  2.25" strieght that would be needed here. What is usually ordered for a V6/dual is.

2.5" 3 bolt flange and gasket
2.5" strieght pipe
2- 2.5" 45D bends
4- 2.25" 90D bends
2.25" strieght pipe
2- 6' 1/2" SS round bar for the mounts

It takes me 6-8 hours to cut,fab, and weld it all together.

[marioemd]

anyone have a 6spd shift knob to sell? I need one for my gen7.

It is a standard Honda 10X1.5 thread, check EBay I am sure there are plenty that will fit.

Also, we ever going to look at your suspension and fix you PS pump?

yes! I still need to come over there. How does sunday morning sound? around 11ish? Carrie is in orientation right now btw! We just took her fingerprints  

[rjp6262]

i had a funny feeling Paul may be able to do it. I've got my magnaflows and headers, but i need a resonator. Paul, you just do the piping and mount everything up correct? should i also grab a new cat while im at it?

derrick what resonator did you get? part number wise.

Get the resonator Derrick got, thats the one I use as far as the cat, I usually leave the stock cat in place and use a Vibrant 2.5" 3 bolt SS flange. If you want to replace the stock cat we can, but I like to use flanges and keep the cat a replaceable piece.

What I do is take raw SS mandrel bends,stright pipe and 1/2" SS round bar, cut and weld it together, basically a full custom fabrication.

Here is where I get my fabrication parts from, they are in Deleware so the stuff normally arrives next day.

i'll get the resonator, (ordering it tonight actually) what size piping do you have, or would you just order the piping i want?

I just order it for the build, but I already have the  2.25" strieght that would be needed here. What is usually ordered for a V6/dual is.

2.5" 3 bolt flange and gasket
2.5" strieght pipe
2- 2.5" 45D bends
4- 2.25" 90D bends
2.25" strieght pipe
2- 6' 1/2" SS round bar for the mounts

It takes me 6-8 hours to cut,fab, and weld it all together.

so for an i4 everything would just end up being 2.25" correct? would i just drop my car off and get it later that day, or the next day?

[NVA-AV6]

We could still do the 2.5" from the cat, if we did 2.25" from the cat we would then want to drop down to 2" at the Y, the reason for this in not to slow the exhaust gasses at the split which would increase back pressure. As far as drop off, if started early AM you could also just hang out.

[rjp6262]

oh nice that could work. i'd love to see it all put together, and give a hand if needed. what size piping would you figure as the best for an i4?