Ah sweet, thanks for the advice!  I've cut off the 4 tabs in the inside of the pocket to temp place ebay fogs right now, but you mentioned that I also need to trim both sides of each pocket to accommodate the Inspire's... will look into that before I remove the bumper.

They didn't make brackets.  They just cut holes and shoved the fogs in there.  They also have 03-05's, and you have an '06 right?

When I had the 03-05 what Tim said was right.. we just cut it and shoved the fogs in there... Now I have the 06-07 front which is much easier and safer... Lex dremeled all the space needed and he put a few tapping screws so the fogs don't fall out, extremely secure and steady.. You could PM him..

I hope Lex didn't have subframe problems either. What's his online name? Sry, not too familiar with these forums.

So general consensus is 1) If you leave the jacket on and mount it, it will hit the subframe of the car?  I'm about to put my dupe Inspire fogs in and would love to know before I start hacking away =P

Btw, I have an 06' bumper, if that makes a difference...

I'm pretty sure mine are replicas. The finish on the lens, etc isnt the best.

Gluck.

Went to the PO to pick up my set today. Pics!


f 3.5
1/13 sec


f 7.1
0"3

I also bought myself a pair of those inspires planning to retro with Blazer fogs. They arrived last week but I need to drop by tomorrow to pick it up (Express Mail requires signature of listed receiving person, not even an agent!)

Here my projector fog lights.

When did u install em?  Any advice before i bust out the dremel? Thanks! Any help would be appreciated.

I can see why you're doing a conversion. What happened to your bumper?

I hit a chunk of snow/ice on the way down from Mt Baldy.  I'm also doing a 03-05 to 06 front end conversion, so I bought Inspire fog replicas for the 06 bumper.

Got the Blazers in the mail and picked up a DDM 4500 kit.  Had to fuss with some wires and got the switches to work. Here are some pics


Clean cutoff
f/3.5
1/10 sec


From uptop the white car (in above pic)
f/5.6
1/8 sec


W/ Inspire headlights on
f/1/8
1/8 sec


The messy setup
f/5
0.8 sec


Testing the other kit for ballast ad light
f/22
10 sec.

Did it look anything like these Ebay fog projectors MOOKEEH MK1 PROJECTO FOG LIGHTS

Nothing like those. Look up the eBay user papsnme. He has the ones you want.

Oh wow, thanks for the refer.  Judging by looks, they look like these Item #350304265795

The 06' Hybrid mirrors are heated. Are there wires that come separately for the heating element?

I have the older Blazers that I plan on retroing into my fogs. I found them on egay for about 25 shipped. The egay user was papsandme. HTH. As for the bulbs, I'm going to use 3000k 880's. I was about to convert them to d2s but said fuck it.

Did it look anything like these Ebay fog projectors MOOKEEH MK1 PROJECTO FOG LIGHTS

I'm planning to do a 06-07 front-end conversion have just bought Ebay fog's to match it.  Has anyone done a Foglight retro before?  I've seen many people state that it's been done, but no actual threads on it or DIYs on such a project.

1) I plan on retrofitting Blazer fog projectors into Ebay 06'07' foglight housings.  My ebay's are metal - is that normal? sounds like a lot of dremel work on metal.

2) I'm planning on purchasing Blazers shipped from Kragen auto parts.  It looks like the newest Blazers on the market today are larger than the older Blazers (http://www.tigeraccessory.com/TAG%20Web ... atalog.pdf - check page 74 or printed page 71 bottom).  Where should I purchase these Blazers - off Kragen or off CustomLights (http://www.customlightz.com/?p=p_150&sN ... -retrofits) who have the older, smaller, Blazers.

Thanks!

tim let me know when you do. I've been highbeamed once already and a flat cutoff would be great.

clickey

I was thinking of putting all 24 in one row, and wiring them in 6 series of 4 LEDs each. Wires would be above and below the row of LEDs.  Prob going to go out to RadioShack today and pick up a perfboard.  Do you have LEDs and a voltage regulator on hand that i may be able to mooch off of you?