What did you do to your Gen7 today?

[wtcii]

Took my Pioneer head unit out and hooked up the stock one.

[Mike]

Cleaned up the 7th Gen real nice. It should stay that way until I drive it in the morning.

[Jeff Likes Bagels]

I bought a case of Z1 today. Now I just need to fix the only damned lock pliers that I have. the adjustable screw is like bent in a 45 degree angle on the inside portion. Once I get that fixed I can get the old tranny filter out.

[clapton924]

Installed Dennison Icelink Ipod integration.

[CrackerTeg]

Redid my retros today. I decided to go with a single projector setup as opposed to the quads especially since I wasn't even using the secondaries. I then flattened out my rotation and color modded the e46 projectors. All in all a good day. I still can't believe i did as much as I did in one day compared to the two months I took for 1.0. I guess I'm going to call this current setup 1.5. lol

[CrazyCreashunz]

Redid my retros today. I decided to go with a single projector setup as opposed to the quads especially since I wasn't even using the secondaries. I then flattened out my rotation and color modded the e46 projectors. All in all a good day. I still can't believe i did as much as I did in one day compared to the two months I took for 1.0. I guess I'm going to call this current setup 1.5. lol

Let me find out Mr. Z man got some skillzzzz...? Next retro'z on ya hummveee lolzzzzz

[CrackerTeg]

If I had a Humvee, it would be retroed. lol

[timot_one]

While I had a LOT of help from Skippy, Cham, and Dom here is what we accomplished today.  Removed old motor.  Prepped new motor.  Removed transmission and installed a LSD.  Replaced cams in new motor with ITR intake and Type S exhaust cams.

[CrazyCreashunz]

If I had a Humvee, it would be retroed. lol

LmaoOooo

While I had a LOT of help from Skippy, Cham, and Dom here is what we accomplished today.  Removed old motor.  Prepped new motor.  Removed transmission and installed a LSD.  Replaced cams in new motor with ITR intake and Type S exhaust cams.

Sweet Tim, can't wait to see it all finished up! When you got people that know what they are doing the work comes easy and yea you can accomplish alot...

[CrackerTeg]

That's some good progress Tim. Props to ya.

I just got back from Jersey where my AV6 coupe exhaust was waiting for me. And then I got snowed on while driving back and getting it out of the car.

[slipkord]

clay bar
Wax
Polish
Cleaned leather and interior
SOLD IT......

[CrackerTeg]

But at least you still have the sedan. Now you need to buy an Oddy for the wife.

[AV6NHBP6SPD]

wiped snow of her. did some drifting in parking lot. this is fun

[timot_one]

Here's the laundry list for today.
Adjusted the valves
Replaced the valve cover
Installed the flywheel and clutch
Installed the tranny
Installed the UR under drive crank and alternator pulleys
Installed new engine mounts
Installed a new engine
Installed new axles
Installed a new auto tensioner SC bracket
Installed the CTSC PS pulley
Installed a new PS pump
Filled the transmission fluid, engine oil, and coolant
Put a bunch of other shit together

Here's the final result.  We will have the new motor running tomorrow as long as I find the right size belt.  The three belts I had, were not the correct length.

[b_beau_09]

de-snowed her, then quickly found out that I had left my driver side window cracked through the 18+ inches of snow we had yesterday, FML.. thank god for those window visors I have..