Title: Greddy Evo2 Question Post by: Accord Euro-R on December 04, 2009, 08:07:07 PM So I finally have an opportunity to get my car on a lift and fix my nasty exhaust leak. I need to order replacement gaskets from Greddy, but I don't know what size to get. I know I need 3 gaskets of the 2-flange variety, but I don't know if I need the 60mm, 70mm, or 80mm. Everything I have found either doesn't have the specs or says the piping is 60-80mm so it isn't very helpful. Someone please gimme an answer ASAP!
Greddy Shop Page (http://store.nexternal.com/shared/StoreFront/default.asp?CS=greddy&StoreType=BtoC&Count1=231502711&Count2=148643136) Title: Re: Greddy Evo2 Question Post by: rich on December 05, 2009, 09:21:22 AM wonder why/where you have an exhaust leak? ive had my exhaust on for almost a year and havent had a problem at all. guess i just got lucky?
Title: Re: Greddy Evo2 Question Post by: MTsixspeed on December 05, 2009, 11:53:33 AM Brah!
Finally getting around to fixing that shit, huh? Is it something you can measure? Take a gasket off and measure the diameter with a metric tape. I'd think you could narrow it down if the different sizes are 10mm apart. Title: Re: Greddy Evo2 Question Post by: Accord Euro-R on December 06, 2009, 02:08:08 PM I wish it were that simple. Since I bought it used, I had to get cheap gaskets which have all just evaporated so I have nothing there. The only measure I could get would be to measure the diameter of the pipe itself but ill have to get under the car to do that.
Title: Re: Greddy Evo2 Question Post by: timot_one on December 06, 2009, 10:08:12 PM Have you called Greddy about it yet?
Title: Re: Greddy Evo2 Question Post by: Accord Euro-R on December 10, 2009, 07:29:56 PM I did email their info line, but I have not received a response as of yet.
Title: Re: Greddy Evo2 Question Post by: timot_one on December 10, 2009, 09:59:57 PM But have you called them?
Title: Re: Greddy Evo2 Question Post by: Accord Euro-R on December 15, 2009, 06:28:55 AM Finally heard back from Greddy....it is the 60mm gasket.
Title: Re: Greddy Evo2 Question Post by: duck17 on February 26, 2010, 04:36:18 PM I was curious to know if any one as a greddy evo 2 with the j-pipe and pre-cats. I am really thinking about having that set-up, but want to know what it sounds like.
Title: Re: Greddy Evo2 Question Post by: NVA-AV6 on February 26, 2010, 04:57:11 PM I usually just trace the flange and goto my local Advance autoparts and match it up.
Title: Re: Greddy Evo2 Question Post by: korrupt3dazn on May 29, 2011, 11:05:42 PM Ill try and see if i have the reciept info still. I just bought them from autozone for my evo2 they were like under 2$ a piece. The brand is felpro, I bought it at autozone.
Title: Re: Greddy Evo2 Question Post by: CrackerTeg on May 30, 2011, 01:04:00 AM Wow. Holy dead thread revival dude.
Title: Re: Greddy Evo2 Question Post by: Mike on May 30, 2011, 09:19:25 AM Ummm yeah like Z said this thread is literally years old. Please do not bump threads that are this old obviously this member has solved his problem by now.
|