|
Title: [Profile] Bwek Post by: Bwek on April 06, 2009, 05:47:39 PM Real Name:Alfred L
Ride:03 CM7 EX-L Color:Silver Engine:K24 Tranny:Autotragic Status:underconstruction Location:oakville, Ontario, Canada Occupation:shipping/receiving Asst manager Interests:Lol too many Organizations:TAC,Jdmrides Awards:None yet Mods Installed:06-07 Hfp front and rear lips, Tein Type flex coilovers, Oem Visors, Pioneer Double Din, staggered fitmint wheels gramlights 57c +30x17x7.5, +40x17x8.5 rear I was running abit of camber to get the wheel to clear the fender i had to roll the rears to fit and pull the fronts to fit Mods Waiting for Installation:ingalls rear camber kit Future Mods and Plans:Direct port nitrous for this summer and a TSX 6-speed tranny next summer Car History:2nd owner saw it for so cheap i couldn't say no Pictures: (http://i184.photobucket.com/albums/x220/mazdab22/Accord/IMG_1010.jpg) ^^before I dropped it (http://i184.photobucket.com/albums/x220/mazdab22/Accord/mycar.jpg) (http://i184.photobucket.com/albums/x220/mazdab22/Accord/IMG00127.jpg) i installed my double din in a way that has allowed me to keep the factory radio working with the 6 disk, am/fm radio as well as keep the steering wheel control :p wish I had better pictures let me know what you guys think Title: Re: Bweks projekt Post by: Milan on April 06, 2009, 07:20:52 PM Nice job fitting that 06-07 front and rear lip on your '03! Care to share how you pulled your front fenders?
Title: Re: Bweks projekt Post by: fabulous010 on April 06, 2009, 07:26:27 PM hey bwek great meet last night. good to see you on here. and please post pics of your double din. thats too clean to leave out
Title: Re: Bweks projekt Post by: Anonymous on April 06, 2009, 08:27:29 PM Welcome to the Elite.
Title: Re: Bweks projekt Post by: Mike on April 06, 2009, 08:38:08 PM Very nice ride...
Title: Re: Bweks projekt Post by: driveaccord on April 06, 2009, 08:54:48 PM Quote from: "Milan" Nice job fitting that 06-07 front and rear lip on your '03! Care to share how you pulled your front fenders? +1 on any info on pulling the fenders....good looking carTitle: Re: Bweks projekt Post by: Bwek on April 06, 2009, 09:01:04 PM for the front fenders i unclipped the wheel liner and literally pulled on them with my hands just did it a little at a time till i had enough to clear the wheels its about 1/4" i pulled it out maybe abit more
the rear lip honestly doesn't fit bad i put mine on in below freezing temps so it lifted on the corners But before it did there were no gaps and it was perfect just gotta take your time with it i was lucky enough my car came with a tape deck so i had the kit in my car already i wouldn't use anything but the oem kit it comes with some solid metal brackets to hold the unit the fitment is so so i guess it depends on which head unit you use but i have a small gap on each side of the unit (http://i184.photobucket.com/albums/x220/mazdab22/Accord/IMG00131.jpg) Title: Re: Bweks projekt Post by: MyNameIsThien on April 06, 2009, 09:13:50 PM Nice. May I ask how you got the 06-07 rear lip to fit on the 03-05 bumper?
Title: Re: Bweks projekt Post by: timot_one on April 06, 2009, 09:14:26 PM I like the 06-07 rear lip. Makes me want to get one.
Title: Re: Bweks projekt Post by: Blackhawk on April 06, 2009, 09:20:19 PM Good job on the adaptations man. Clean car and welcome to the Elite.
Title: Re: Bweks projekt Post by: seththekorean on April 06, 2009, 09:25:02 PM Welcome to elite, nice silver coupe man.
Title: Re: Bweks projekt Post by: Bwek on April 06, 2009, 09:30:41 PM Quote from: "MyNameIsThien" Nice. May I ask how you got the 06-07 rear lip to fit on the 03-05 bumper? I installed the lower bolts first then i peeled a tiny bit of the double sided tape so it was just above the lip i then attached the center of the lip went to ea corner lifted the corners and pulled the tape out then put the screws in the sides took about 20 mins Title: Re: Bweks projekt Post by: Bwek on April 06, 2009, 09:34:25 PM Quote from: "timot_one" I like the 06-07 rear lip. Makes me want to get one. do it do it do it to me it didn't matter cause i only paid $90 canadian for ea lip brand new so i figured why not try i haven't seen any other 7th gens nearly as low as mine it doesn't look dumped cause of the smallish wheels but i have trouble everywhere with scraping I may be getting a prototyped header and catback for the 7th done on my car hopefully it goes through the company does top quality work Title: Re: Bweks projekt Post by: k24low20z on April 06, 2009, 09:55:29 PM welcome to the site man, nice mods....
Title: Re: Bweks projekt Post by: Latin2nr on April 07, 2009, 08:17:20 AM Welcome to ECM Al, cool coupe.
Title: Re: Bweks projekt Post by: timot_one on April 07, 2009, 10:49:15 AM Quote from: "Bwek" Quote from: "timot_one" I like the 06-07 rear lip. Makes me want to get one. do it do it do it If I did, I'd probably be the first 03-05 sedan with an 06-07 coupe rear lip. I wouldn't mind getting it at the prices you paid though. Got another hook up for the rear lip? Title: Re: Bweks projekt Post by: driveaccord on April 07, 2009, 11:34:25 AM Quote from: "Bwek" for the front fenders i unclipped the wheel liner and literally pulled on them with my hands just did it a little at a time till i had enough to clear the wheels its about 1/4" i pulled it out maybe abit more thx for the input .....i appreciate itTitle: Re: Bweks projekt Post by: lilmalu on April 07, 2009, 03:07:52 PM Quote from: "timot_one" If I did, I'd probably be the first 03-05 sedan with an 06-07 coupe rear lip. I wouldn't mind getting it at the prices you paid though. Got another hook up for the rear lip? It's already been done. (http://img.photobucket.com/albums/v244/chich-a-ron/PICT0021-1.jpg) (http://img.photobucket.com/albums/v244/chich-a-ron/DSC01612-1.jpg) Title: Re: Bweks projekt Post by: timot_one on April 07, 2009, 03:29:05 PM Sweet. Then I'll do it too and not be the first person to pull it off.
Title: Re: Bweks projekt Post by: Bwek on April 07, 2009, 04:12:56 PM No more lips at those prices :(
it was apart of the Canada clearance event a heat gun would def have to be used to fit it to a 4 door sedan I tryed it on my friends car Title: Re: Bweks projekt Post by: timot_one on April 07, 2009, 10:29:56 PM It's a good thing I have a heat gun and one of my friend's is an experienced auto body guy.
Title: Re: Bweks projekt Post by: CrazyCreashunz on April 07, 2009, 10:33:42 PM Nice ride dude and some nice modz as well!
|