Title: [Profile] JohnnyG123
Post by: JohnnyG123 on April 22, 2008, 10:24:57 PM
Quote from: JohnnyG123;231203
Car is a 2010 BBP EX-L V6 6MT. I've had it since october 2010. I bought it used from a friend so he could afford to buy his new house. My previous car was a 2003 SSM EX I4 5MT Accord coupe.
Current Mods are:
Engine
Injen CAI w/ hydroshield filter cover
RV6 PCD's
RV6 V3 j-pipe
Megan Racing OE-RS Catback
Suspension/Brakes
Megan Racing EZ coilovers
Progress 22mm RSB
EBC slotted rotors
EBC Greenstuff pads
Stainless Steel braided lines
Volk TE37 in gunmetal, 19x8.5 +43 offset
Lighting
DDM 4500k HID kit
Ebay yellow fogs
Yellow DRL/High beams
LED interior lights
Zexen rear taillight mod
Audio
USB interface
Memphis Audio 6.5" replacement speakers
Memphis Audio 250w amp w/ LOC from factory sub
Memphis Audio 10" Subwoofer
Interior/Misc
Modded TL shift knob
35% Window tint
TSX switchblade key
Future
255/35/19 tires (havent decided on a tire just yet)
RL front caliper upgrade
Rear brake caliper adaptor
AEM FIC
MDX riser and ported intake runners
3-arm camber kit
Pictures in somewhat chronological order. Stock wheels with spacers are currently installed.
My previous accord
([url]http://img.photobucket.com/albums/v414/J0hnyG123/daves%20car/build%20thread/P1010086_87_88_89_90_91_92_tonemapped.jpg[/url])
([url]http://img.photobucket.com/albums/v414/J0hnyG123/daves%20car/build%20thread/P1010206_7_8_9_tonemapped.jpg[/url])
([url]http://img.photobucket.com/albums/v414/J0hnyG123/daves%20car/build%20thread/P1010193_4_5_6_7_tonemapped.jpg[/url])
([url]http://img.photobucket.com/albums/v414/J0hnyG123/daves%20car/build%20thread/P5080366.jpg[/url])([url]http://img.photobucket.com/albums/v414/J0hnyG123/daves%20car/build%20thread/P5080367.jpg[/url])
([url]http://img.photobucket.com/albums/v414/J0hnyG123/daves%20car/build%20thread/P5080368.jpg[/url])
([url]http://img.photobucket.com/albums/v414/J0hnyG123/daves%20car/build%20thread/P5080369.jpg[/url])
([url]http://img.photobucket.com/albums/v414/J0hnyG123/daves%20car/build%20thread/P5120430And7more_tonemapped.jpg[/url])
([url]http://img.photobucket.com/albums/v414/J0hnyG123/daves%20car/build%20thread/2011-11-06_13-42-34_523.jpg[/url])
([url]http://img.photobucket.com/albums/v414/J0hnyG123/daves%20car/build%20thread/2011-10-23_16-24-13_961.jpg[/url])
([url]http://img.photobucket.com/albums/v414/J0hnyG123/daves%20car/build%20thread/2011-10-23_16-24-25_551.jpg[/url])
([url]http://img.photobucket.com/albums/v414/J0hnyG123/daves%20car/build%20thread/2011-10-23_16-24-36_118.jpg[/url])
([url]http://img.photobucket.com/albums/v414/J0hnyG123/daves%20car/build%20thread/2011-10-23_16-24-59_838.jpg[/url])
([url]http://img.photobucket.com/albums/v414/J0hnyG123/daves%20car/build%20thread/P9181097_8_9_tonemapped.jpg[/url])
([url]http://img.photobucket.com/albums/v414/J0hnyG123/daves%20car/build%20thread/P9181063_4_5_6_tonemapped.jpg[/url])
([url]http://img.photobucket.com/albums/v414/J0hnyG123/daves%20car/build%20thread/P9181115_6_7_8_9_tonemapped.jpg[/url])
([url]http://img.photobucket.com/albums/v414/J0hnyG123/daves%20car/build%20thread/P1010364_5_tonemapped.jpg[/url])
Current Mods are:
Engine
Injen CAI w/ hydroshield filter cover
RV6 PCD's
RV6 V3 j-pipe
Megan Racing OE-RS Catback
Suspension/Brakes
Megan Racing EZ coilovers
Progress 22mm RSB
EBC slotted rotors
EBC Greenstuff pads
Stainless Steel braided lines
Volk TE37 in gunmetal, 19x8.5 +43 offset
Lighting
DDM 4500k HID kit
Ebay yellow fogs
Yellow DRL/High beams
LED interior lights
Zexen rear taillight mod
Audio
USB interface
Memphis Audio 6.5" replacement speakers
Memphis Audio 250w amp w/ LOC from factory sub
Memphis Audio 10" Subwoofer
Interior/Misc
Modded TL shift knob
35% Window tint
TSX switchblade key
Future
255/35/19 tires (havent decided on a tire just yet)
RL front caliper upgrade
Rear brake caliper adaptor
AEM FIC
MDX riser and ported intake runners
3-arm camber kit
Pictures in somewhat chronological order. Stock wheels with spacers are currently installed.
My previous accord
([url]http://img.photobucket.com/albums/v414/J0hnyG123/daves%20car/build%20thread/P1010086_87_88_89_90_91_92_tonemapped.jpg[/url])
([url]http://img.photobucket.com/albums/v414/J0hnyG123/daves%20car/build%20thread/P1010206_7_8_9_tonemapped.jpg[/url])
([url]http://img.photobucket.com/albums/v414/J0hnyG123/daves%20car/build%20thread/P1010193_4_5_6_7_tonemapped.jpg[/url])
([url]http://img.photobucket.com/albums/v414/J0hnyG123/daves%20car/build%20thread/P5080366.jpg[/url])([url]http://img.photobucket.com/albums/v414/J0hnyG123/daves%20car/build%20thread/P5080367.jpg[/url])
([url]http://img.photobucket.com/albums/v414/J0hnyG123/daves%20car/build%20thread/P5080368.jpg[/url])
([url]http://img.photobucket.com/albums/v414/J0hnyG123/daves%20car/build%20thread/P5080369.jpg[/url])
([url]http://img.photobucket.com/albums/v414/J0hnyG123/daves%20car/build%20thread/P5120430And7more_tonemapped.jpg[/url])
([url]http://img.photobucket.com/albums/v414/J0hnyG123/daves%20car/build%20thread/2011-11-06_13-42-34_523.jpg[/url])
([url]http://img.photobucket.com/albums/v414/J0hnyG123/daves%20car/build%20thread/2011-10-23_16-24-13_961.jpg[/url])
([url]http://img.photobucket.com/albums/v414/J0hnyG123/daves%20car/build%20thread/2011-10-23_16-24-25_551.jpg[/url])
([url]http://img.photobucket.com/albums/v414/J0hnyG123/daves%20car/build%20thread/2011-10-23_16-24-36_118.jpg[/url])
([url]http://img.photobucket.com/albums/v414/J0hnyG123/daves%20car/build%20thread/2011-10-23_16-24-59_838.jpg[/url])
([url]http://img.photobucket.com/albums/v414/J0hnyG123/daves%20car/build%20thread/P9181097_8_9_tonemapped.jpg[/url])
([url]http://img.photobucket.com/albums/v414/J0hnyG123/daves%20car/build%20thread/P9181063_4_5_6_tonemapped.jpg[/url])
([url]http://img.photobucket.com/albums/v414/J0hnyG123/daves%20car/build%20thread/P9181115_6_7_8_9_tonemapped.jpg[/url])
([url]http://img.photobucket.com/albums/v414/J0hnyG123/daves%20car/build%20thread/P1010364_5_tonemapped.jpg[/url])
Title: Re: [Profile] JohnnyG123
Post by: timot_one on April 23, 2008, 10:46:06 AM
Welcom John. I have some of those mods that you're planning on upgrading too. I can safely say that you'll be very happy with the Legend caliper swap and TSX 6MT. Have you considered the TL-S front sway and Accord 6MT Shock Tower Bar for your suspension upgrades?
Title: Re: [Profile] JohnnyG123
Post by: JohnnyG123 on April 23, 2008, 08:36:04 PM
the tl-s front sway is on the maybe list. as for the 6mt front shock tower bar, i really dont see the point of having that and the neuspeed bar at the same time. because the shock towers are already connected to the back of the engine bay with those short bars that the 6mt bar replaces. with those and the neuspeed bar together i think that would have the same effect.
Title: Re: [Profile] JohnnyG123
Post by: timot_one on April 23, 2008, 11:52:15 PM
Just so you know.....
OEM 6MT STB > Neuspeed STB
.....because it ties into the firewall. I can understand why you'd be iffy about the front sway bar. It's a total PITA to install.
OEM 6MT STB > Neuspeed STB
.....because it ties into the firewall. I can understand why you'd be iffy about the front sway bar. It's a total PITA to install.
Title: Re: [Profile] JohnnyG123
Post by: Abailey4 on April 24, 2008, 08:17:05 PM
Welcome John. I've been debating on getting both Neuspeed and 6spd strut bars as well and wondering how much better it would be with both or just one. I guess the only way to find out is install one, wait and then install the other. Small difference def can go a long way though. For instance the Tl-s front sway is only 1.8mm bigger than our stock bar but the handling and body roll difference is HUGE in my eyes. Maybe that's just me though.
Title: Re: [Profile] JohnnyG123
Post by: MyNameIsThien on April 25, 2008, 12:36:58 AM
Welcome aboard Johnny, You are going to like how the Firehawk GT perform.
Title: Re: [Profile] JohnnyG123
Post by: JohnnyG123 on April 25, 2008, 09:10:33 PM
Quote from: "timot_one"
Just so you know.....
OEM 6MT STB > Neuspeed STB
.....because it ties into the firewall. I can understand why you'd be iffy about the front sway bar. It's a total PITA to install.
i dont see tying into the firewall as necesary because the car came from the factory with bars that tie into the firewall. i think just adding the neuspeed bar to that would have the same, if not better effect than just adding the 6mt bar because you have a stronger bar that goes straght across and doesnt curve and allow for flex. my $.02.OEM 6MT STB > Neuspeed STB
.....because it ties into the firewall. I can understand why you'd be iffy about the front sway bar. It's a total PITA to install.
ill probly throw the tl-s front sway bar on the car at some point. i know ill get bored once iget the current mod list completed. and i am a suspension junkie afterall.
oh and if anyone was wondering what i have to contribute to the forum, i am pretty knowledgable about suspension and alignments. i dont know much about the aftermarket products available for the accord just yet, but im still reading and learning.
Title: Re: [Profile] JohnnyG123
Post by: timot_one on April 27, 2008, 12:40:06 PM
Good stuffy John. I may have to run a few questions by ya when I do my alignment again. I've been sticking with the stock alignment specs, but I'm thinking about playing around with the camber in the front and rear to see if it improves my handling.
I have both the Neuspeed bar (installed) and the 6MT bar (not installed yet). Since I have to take off the Neuspeed bar to install the 6MT bar, I'll go out and try to do a quick comparison. There are a few twisty roads around here that I can bomb. I did notice a big difference when I added the Neuspeed bar though. I have also noticed a great difference with the 22mm Comptech rear sway bar, and an improvement with the TL-S front sway bar. Once I get the 6MT bar on, my suspension should be pretty beefy. I think the only other suspension component that I want to add is the Cusco TSX Type II chassis brace.
I have both the Neuspeed bar (installed) and the 6MT bar (not installed yet). Since I have to take off the Neuspeed bar to install the 6MT bar, I'll go out and try to do a quick comparison. There are a few twisty roads around here that I can bomb. I did notice a big difference when I added the Neuspeed bar though. I have also noticed a great difference with the 22mm Comptech rear sway bar, and an improvement with the TL-S front sway bar. Once I get the 6MT bar on, my suspension should be pretty beefy. I think the only other suspension component that I want to add is the Cusco TSX Type II chassis brace.
Title: Re: [Profile] JohnnyG123
Post by: JohnnyG123 on April 28, 2008, 12:14:08 AM
sure thing man, id be glad to help ya with your alignment specs. once i get my camber kits and new suspension on im planning on running -1.5 camber all around. toe will stay at stock specs for the sake of tire wear. and with my 245 wide tires i should be able to corner like a mofo.
i may as well add the front sway bar to the list cause everyone has good things to say about it. ive been curious about that tsx chassis brace as well.
a few minor updates : ebay amber foglights, pnp hid kit ordered last week, should be on the way soon. also i traded trunk lids with mtsixspeed today so now my car has a spoiler. updated pics soon.
i may as well add the front sway bar to the list cause everyone has good things to say about it. ive been curious about that tsx chassis brace as well.
a few minor updates : ebay amber foglights, pnp hid kit ordered last week, should be on the way soon. also i traded trunk lids with mtsixspeed today so now my car has a spoiler. updated pics soon.
Title: Re: [Profile] JohnnyG123
Post by: JohnnyG123 on May 03, 2008, 11:50:45 PM
futre mod list updated. took most of the stuff off because i bought this 
:
(http://a772.ac-images.myspacecdn.com/images01/123/l_c5402a55af6919be71f67beee8811edb.jpg)
:(http://a772.ac-images.myspacecdn.com/images01/123/l_c5402a55af6919be71f67beee8811edb.jpg)
Title: Re: [Profile] JohnnyG123
Post by: Latin2nr on March 03, 2009, 06:17:15 PM
Never too late to say welcome John.
Title: Re: [Profile] JohnnyG123
Post by: Anonymous on March 03, 2009, 06:41:27 PM
welcome to the elite.
Title: Re: [Profile] JohnnyG123
Post by: JohnnyG123 on May 05, 2010, 10:30:53 PM
Updated OP. Some big changes coming this weekend! Tinting windows friday, "new" wheels and installing lowering springs saturday. Will post pics when this is all done.
Title: Re: [Profile] JohnnyG123
Post by: timot_one on April 06, 2011, 12:14:11 AM
What happened? Your car turned ugly and blue?
Title: Re: [Profile] JohnnyG123
Post by: gargantula99 on April 06, 2011, 10:25:44 AM
ROFL!!
Title: Re: Re: [Profile] JohnnyG123
Post by: JohnnyG123 on December 07, 2012, 09:18:03 PM
I own a 7th gen again. Picked up a 2003 ssm 6-6 coupe for a steal. Probably just gonna clean it up and do maintenance and sell it. Pics to follow
Title: Re: Re: [Profile] JohnnyG123
Post by: JohnnyG123 on December 07, 2012, 09:19:39 PM
(http://img.photobucket.com/albums/v414/J0hnyG123/20121203_170134.jpg)
Title: Re: Re: [Profile] JohnnyG123
Post by: Nit3h4wk C0uP3 on December 07, 2012, 09:35:29 PM
Yay!
Title: Re: [Profile] JohnnyG123
Post by: Mike on December 08, 2012, 12:07:56 AM
How much? Its even the right color!!!
Title: Re: [Profile] JohnnyG123
Post by: JohnnyG123 on December 13, 2012, 09:50:09 PM
got it for 4 grand. has a few dings and dents but overall in decent condition. gonna be replacing the timing belt, water pump, spark plugs, and all the fluids, and doing a very thorough detail. should be like a new car when im done! also picked up some replacement headlights and foglights. ill post some in progress and completed pics on here. will probably do all of it in january when im on leave.
Title: Re: Re: [Profile] JohnnyG123
Post by: Mike on December 14, 2012, 06:23:03 AM
Willing to tale an offer as it sits?
Title: Re: [Profile] JohnnyG123
Post by: JohnnyG123 on December 15, 2012, 02:25:06 PM
Willing to tale an offer as it sits?
not just yet, i need it for a couple months while i have some downtime on the 8th gen. plus i already ordered all the parts. will probably try to sell it around march-aprilTitle: Re: [Profile] JohnnyG123
Post by: JohnnyG123 on December 15, 2012, 02:36:44 PM
updated the OP with my current build thread from the 8th gen site.
Fun Fact: the black s2k i have photos with belongs to rocketstarter, a former SECM member. Now that we're both in the military we are stationed real close to eachother.
Fun Fact: the black s2k i have photos with belongs to rocketstarter, a former SECM member. Now that we're both in the military we are stationed real close to eachother.
Title: Re: [Profile] JohnnyG123
Post by: timot_one on December 18, 2012, 11:51:28 AM
Where are you stationed?
Title: Re: [Profile] JohnnyG123
Post by: JohnnyG123 on December 18, 2012, 05:12:25 PM
i'm currently on the uss enterprise out of norfolk, VA and he is at langley AFB in hampton VA
Title: Re: Re: [Profile] JohnnyG123
Post by: Nit3h4wk C0uP3 on December 18, 2012, 05:59:33 PM
The Enterprise D or E?
Hehe
Hehe
Title: Re: [Profile] JohnnyG123
Post by: gargantula99 on December 18, 2012, 07:35:00 PM
Damn Trekkies.
Title: Re: Re: [Profile] JohnnyG123
Post by: CrackerTeg on December 18, 2012, 07:45:41 PM
The term is trekkers. Trekies is derogatory.
Title: Re: [Profile] JohnnyG123
Post by: gargantula99 on December 18, 2012, 10:09:44 PM
I can call myself whatever I like.
Title: Re: [Profile] JohnnyG123
Post by: JohnnyG123 on December 18, 2012, 10:22:34 PM
its actually the enterprise b for brokedick 8-). at least it is inactivated now.
Title: Re: Re: [Profile] JohnnyG123
Post by: CrackerTeg on December 19, 2012, 07:02:30 AM
Don't you mean deactivated?
Title: Re: [Profile] JohnnyG123
Post by: JohnnyG123 on December 19, 2012, 05:18:18 PM
not sure, the navy called it the "inactivation ceremony". but surely they couldnt be wrong in all their infinite wisdom :waitwhat:
Title: Re: Re: [Profile] JohnnyG123
Post by: CrackerTeg on December 19, 2012, 05:37:52 PM
Silly squids. Lol