EliteCM.net

K Series Performance => Stock Motors, Transmissions, & Maintenance => Topic started by: Moe on June 24, 2013, 10:49:49 AM



Title: Identify a tranny component
Post by: Moe on June 24, 2013, 10:49:49 AM
We are in the stages of finishing an auto to manual swap and the car is running with the auto ECU and wire harness for now. The question is, I have this on the tranny and for the life of me, I can't figure out what goes plugged in there.  It is circled in red below.

(http://img.tapatalk.com/d/13/06/24/u2u2u3aq.jpg)


Title: Re: Identify a tranny component
Post by: timot_one on June 25, 2013, 05:01:13 PM
Not sure if its just me, but only the top 25% of the picture is showing.


Title: Re: Identify a tranny component
Post by: gargantula99 on June 25, 2013, 10:23:51 PM
It's you. The whole picture shows on my phone.


Title: Re: Identify a tranny component
Post by: NVA-AV6 on June 25, 2013, 11:13:16 PM
It is a plastic piece that prevents stuff from getting into the tranny thru the breather tube.

Part number 2 in the diagram below.....

http://www.bkhondaparts.com/parts-catalog/honda/accord/2005/2dr-ex/ka5mt/transmission-manual/mt-shift-arm-l4 (http://www.bkhondaparts.com/parts-catalog/honda/accord/2005/2dr-ex/ka5mt/transmission-manual/mt-shift-arm-l4)


Title: Re: Identify a tranny component
Post by: Moe on June 26, 2013, 10:11:05 AM
Thanks a lot that really helped me. I'm going to go get that cap.


TinyPortal © 2005-2012