EliteCM.net

K Series Performance => Stock Motors, Transmissions, & Maintenance => Topic started by: James_P on March 12, 2012, 10:04:00 PM



Title: Valve Cover Question
Post by: James_P on March 12, 2012, 10:04:00 PM
Hey guys, I was 100% sure on where to post this question but i figured stock motors was a good choice. Please move it if it is in the wrong form, but my question is what is the torque specs on the valve cover bolts, and what is the order? Btw the motor is a k24a4,
thanks a bunch!  :)


Title: Re: Valve Cover Question
Post by: timot_one on March 13, 2012, 12:42:08 AM
Here you go.
(http://i58.photobucket.com/albums/g274/timot_one/Random%20Car%20Pics/valvecover1.jpg)
(http://i58.photobucket.com/albums/g274/timot_one/Random%20Car%20Pics/valvecover2.jpg)


Title: Re: Valve Cover Question
Post by: James_P on March 13, 2012, 08:30:55 AM
Thanks so much!


Title: Re: Valve Cover Question
Post by: timot_one on March 13, 2012, 09:32:58 AM
No problem!


Title: Re: Re: Valve Cover Question
Post by: CrackerTeg on March 13, 2012, 10:04:52 AM
There's a torque spec for the valve cover? I've never torqued the valve cover down, unless you count German torque spec as an actual spec.


Title: Re: Valve Cover Question
Post by: timot_one on March 13, 2012, 12:59:01 PM
If you think about it logically, you want to be sure to torque it properly so you don't damage the gasket an have an oil leak. Its a rubber gasket, so it's easy to over tighten.


Title: Re: Re: Re: Valve Cover Question
Post by: CrackerTeg on March 13, 2012, 04:54:52 PM
If you think about it logically, you want to be sure to torque it properly so you don't damage the gasket an have an oil leak. Its a rubber gasket, so it's easy to over tighten.
True. I have a delicate touch though.


Title: Re: Valve Cover Question
Post by: CrazyCreashunz on March 14, 2012, 08:51:40 PM
I have over tightend the valve cover bolts on Piero's ride before and snapped one of the bolts! So be really careful when tightening.... we had to special order the damn things and it came 2 days later.


Title: Re: Valve Cover Question
Post by: timot_one on March 14, 2012, 09:28:10 PM
You probably coulda gotten some from me. I have a couple of sets of this bolts from the 4 different cylinder heads that I have.


Title: Re: Re: Valve Cover Question
Post by: CrackerTeg on March 14, 2012, 09:34:15 PM
This was a while back Tim. I remember Billy telling me about it.


Title: Re: Valve Cover Question
Post by: Armyguy239 on March 27, 2012, 11:40:52 AM
If you think about it logically, you want to be sure to torque it properly so you don't damage the gasket an have an oil leak. Its a rubber gasket, so it's easy to over tighten.
True. I have a delicate touch though.


smh, can be taken in so many different ways Z....hm.... looks like i did it right when i replaced my gaskets


Title: Re: Re: Valve Cover Question
Post by: CrackerTeg on March 27, 2012, 03:52:44 PM
That was the point.


TinyPortal © 2005-2012