EliteCM.net

J Series Performance => Engine and Drivetrain Performance => Topic started by: accordguy04 on November 15, 2011, 02:15:19 PM



Title: Innovative Motor Mounts
Post by: accordguy04 on November 15, 2011, 02:15:19 PM
Saw somethin about it in the K Series section, but nothing in J series.  I'm thinkin about ordering a set of 75A Black motor mounts from innovative.  Any reviews?  Anyone on here use them?  Let me know, and thanks in advance.


Title: Re: Innovative Motor Mounts
Post by: Mike on November 15, 2011, 02:18:53 PM
Jus get your OEM mounts poly filled. My poly filled OEM mounts cause a lot of vibration I can provide you with that feed back.


Title: Re: Innovative Motor Mounts
Post by: accordguy04 on November 16, 2011, 08:30:27 AM
I emailed the guy at XLR8 about the kit to make sure which mounts come with it, and he actually ended up recommending their brand.  They are only $10 more so I'll prolly end up gettin em.  I just wanna make sure mine are actually bad before I blow the money.  So I'll do the handbrake thing and see how the mounts react.  I'm thinkin its just the passenger side mount, because when I had it on the dyno a couple weeks ago the motor was shakin a little bit... but then it jumped up like an inch.  Just once, but enough to get me thinkin. lol


Title: Re: Innovative Motor Mounts
Post by: Mike on November 16, 2011, 08:32:40 AM
Ryan you have PM...


Title: Re: Innovative Motor Mounts
Post by: accordguy04 on November 29, 2011, 08:42:23 AM
When I swap out the mounts, can I do it with the car sittin on the ground or will I have to put the front end up on jack stands?  Seems like a silly question... I know.


Title: Re: Innovative Motor Mounts
Post by: Mike on November 29, 2011, 11:24:10 AM
Car has to be off the ground. I'd suggest removing your radiator to do the front out. There is enough space to get the mounts out in but, the angles have to be perfect. Trust me I ended up buying a new radiator because the mount went through the old one.


Title: Re: Innovative Motor Mounts
Post by: accordguy04 on November 29, 2011, 11:33:12 AM
Wow... dont freak me out like that. haha


Title: Re: Innovative Motor Mounts
Post by: Mike on November 29, 2011, 02:34:52 PM
Just jack the front end and pull the radiator to do the font one. The right side one could be done with the car on the ground and a jack supporting the weight of the engine.


Title: Re: Innovative Motor Mounts
Post by: accordguy04 on November 29, 2011, 02:48:16 PM
I gotcha.  As always, thanks for the info Mike. haha


Title: Re: Innovative Motor Mounts
Post by: CrackerTeg on November 29, 2011, 04:58:46 PM
Or, just leave your radiator in that way you have a good excuse for an upgraded one.


Title: Re: Innovative Motor Mounts
Post by: accordguy04 on November 29, 2011, 10:10:02 PM
Lol Nice Z.  Honestly I dont even wanna buy the mounts... but the vibration/shake is getting worse.  Its almost to the point where I wish something would actually just break so I would atleast know and be done with the headache. lol


TinyPortal © 2005-2012