|
Title: [Profile] Kschwiggy Post by: kSchwiggy on June 24, 2009, 08:00:25 PM Real Name: Kai
Ride: 06 6spd V6 Color: Black Engine: 3.5L Tranny: Manual Status: ? Running.. Location: Arlington, Virginia Occupation: Patent Examiner / Law Student Interests: Everything Organizations: Awards: Mods: Exterior: 35% Tint OEM Fog lights (custom recessed behind bumper) Grillcraft Lower 3 pc set Debadged "Accord" and "V6" S2000 AP2 exhaust tips Interior: OEM all weather floor mats Custom Cut shift lever Custom shift lever plate Ultimate Pedals aluminum pedals w/ engraved Honda logo S2000 Gauge cluster Custom cluster bezel Defi Black face gauges - Oil pressure, Oil temp, Boost/vacum, Fuel pressure AEM air/fuel ratio gauge USA Spec Ipod connector Neuspeed short shift kit S2000 start button Compustar Pro alarm system / remote start OEM brushed aluminum trim Skunk2 shift knob Under the Hood: 3.5L engine built by Paul (nva-av6) RL pistons (11:1 compression) TL-S cams TL-S exhaust springs (estimated 8500 redline) Ported and polished Heads AEM V2 intake RV6 J Pipe Custom polished intake manifold Corsport aluminum shift bushings Polished aluminum power steering reservoir Polished aluminum coolant overflow tank - relocated Custom polished aluminum oil catch can Custom washer fluid tube Comptech oil cap Custom billet aluminum dipstick Aluminum battery plate with Optima Red Top battery Custom grounding kit Stainless steel radiator hoses Aeromotive fuel pressure regulator AEM FIC engine management Handling / Suspension: TL-S front and rear sway bars Neuspeed upper strut bar Tein SS coilovers RL 4 piston front calipers with 13" rotora rotors 12.2" rear brake upgrade Stainless steel brake lines Ingalls camber kits front and rear Pictures: (http://i181.photobucket.com/albums/x40/kairajan/car.jpg) (http://i181.photobucket.com/albums/x40/kairajan/DSC_0169.jpg) (http://i181.photobucket.com/albums/x40/kairajan/photo.jpg) (http://i181.photobucket.com/albums/x40/kairajan/DSC01736.jpg) (http://i181.photobucket.com/albums/x40/kairajan/DSC01742.jpg) (http://i181.photobucket.com/albums/x40/kairajan/100_1044.jpg) (http://i181.photobucket.com/albums/x40/kairajan/DSC01481.jpg) (http://i181.photobucket.com/albums/x40/kairajan/DSC01210.jpg) (http://i181.photobucket.com/albums/x40/kairajan/DSC01209.jpg) Title: Re: Kschwiggys profile Post by: dizzle on June 24, 2009, 08:04:01 PM welcome to ECM!
just curious, what color is your interior? if its tan/ivory, could you take a picture of your tinted windows? debating if i want to do the legal 35% which you have or go 20% Title: Re: Kschwiggys profile Post by: b_beau_09 on June 24, 2009, 08:05:25 PM ^check out the last picture.. it's black interior.
welcome kai! glad you could join us over here. Title: Re: Kschwiggys profile Post by: dizzle on June 24, 2009, 08:06:20 PM oh duh lol, didnt see it was black leather
Title: Re: Kschwiggys profile Post by: Mike on June 24, 2009, 08:22:33 PM Car is sick welcome!!
Title: Re: Kschwiggys profile Post by: hondaguy214 on June 24, 2009, 08:41:31 PM welcome to elite. love the car
Title: Re: Kschwiggys profile Post by: CrackerTeg on June 24, 2009, 08:47:58 PM Finally, a proper profile and welcome. I'm curious on how you did that shift plate.
Title: Re: Kschwiggys profile Post by: ibcnunv on June 24, 2009, 08:50:21 PM Love the car... Can you post a picture of the head lights on....
Title: Re: Kschwiggys profile Post by: kSchwiggy on June 24, 2009, 09:02:11 PM thanks for the comments...
ibcnunv-- actually the ebay projectors are no longer on the car... i took them off, and completely took them apart/cut them up. the housings will be used to make my dual retrofit with AFS bixenons when i get to it. crackerteg-- the plate was a prototype and needs to be redone... but it is basically a thin sheet of aluminum cut to size with the hole cut out in the middle, lightly brushed with sandpaper.. and the center piece is a piece of plastic held up to the aluminum plate via a spring underneath Title: Re: Kschwiggys profile Post by: Mr Eazy on June 24, 2009, 10:24:32 PM Welcome to The Elite, the ride is looking Excellent. I love your polished intake. Keep up the awesome work.
Title: Re: Kschwiggys profile Post by: Fenix on June 24, 2009, 11:03:17 PM more pics of your spedo/cluster please
welcome to elite Title: Re: Kschwiggys profile Post by: Paulius005 on June 24, 2009, 11:45:30 PM car looks great!, it's a good thing you took off those ebay projectors :D... more pics of the s2k speedo!
Title: Re: Kschwiggys profile Post by: Abailey4 on June 25, 2009, 10:10:52 AM Good to see you're getting involved over here Kai. Welcome!
Title: Re: Kschwiggys profile Post by: BliNx197 on June 25, 2009, 11:25:07 AM ^+1 and putting us all to shame! But god I love those s2k gauges! U get em fully operational yet?
Title: Re: Kschwiggys profile Post by: CrazyCreashunz on June 25, 2009, 11:30:38 AM Welcome Kai, enjoy your stay!
Title: Re: Kschwiggys profile Post by: kSchwiggy on June 25, 2009, 11:31:54 AM Fenix/Paulius.... i have a thread detailing the process in the Interior Styling section.. check it out!
blinx- the cluster is fully functional... i just have a few small bugs to work out and finish fiberglassing the bezel for the cluster, then im DONE! Title: Re: Kschwiggys profile Post by: Fenix on June 25, 2009, 11:36:47 AM I know of the pics in that thread, are they of the finished product?
Title: Re: Kschwiggys profile Post by: Paulius005 on June 25, 2009, 11:59:31 AM Quote from: "Fenix" I know of the pics in that thread, are they of the finished product? yup same statement/question Title: Re: Kschwiggys profile Post by: kSchwiggy on June 25, 2009, 12:36:42 PM nope... theyre pictures of my first attempt at the white/red color scheme (the red bar needs to be redone to look smoother), AND the numbering on the tachometer will be changed so that redline is 6800 rpm, not the s2000's 9k rpm. but the cluster hasnt changed looks since those pictures yet so they are the most current pics. once the bezel is complete... i will look into changing the face of the cluster, that is Stage 2 of the project.
Title: Re: Kschwiggys profile Post by: AV6NHBP6SPD on June 29, 2009, 10:57:19 AM can you post pic of rear brakes how they look behind wheels
Title: Re: Kschwiggys profile Post by: Latin2nr on July 02, 2009, 06:09:31 PM Welcome to ECM Kai.
Title: Re: Kschwiggys profile Post by: kSchwiggy on July 08, 2009, 11:28:41 AM latest addition:
(http://i181.photobucket.com/albums/x40/kairajan/S2000%20cluster/DSC_0622.jpg) (http://i181.photobucket.com/albums/x40/kairajan/S2000%20cluster/DSC_0614.jpg) Title: Re: Kschwiggys profile Post by: timot_one on July 08, 2009, 11:48:10 AM Looks pretty good man.
Title: Re: Kschwiggys profile Post by: lilmalu on July 08, 2009, 03:19:00 PM Now this looks sick. Keep up the great work/mods
Title: Re: Kschwiggys profile Post by: 05AccordV6 on July 09, 2009, 10:14:48 AM is that s2000 cluster functioning yet?!?
Title: Re: Kschwiggys profile Post by: kSchwiggy on July 09, 2009, 11:34:38 AM yeah.. theres a full thread about it in the interior electronics section with pics and videos
|