[Profile] Bwek

[Bwek]

Real Name:Alfred L
Ride:03 CM7 EX-L
Color:Silver
Engine:K24
Tranny:Autotragic
Status:underconstruction

Location:oakville, Ontario, Canada
Occupation:shipping/receiving Asst manager
Interests:Lol too many
Organizations:TAC,Jdmrides
Awards:None yet

Mods Installed:06-07 Hfp front and rear lips, Tein Type flex coilovers, Oem Visors, Pioneer Double Din, staggered fitmint wheels gramlights 57c +30x17x7.5, +40x17x8.5 rear I was running abit of camber to get the wheel to clear the fender i had to roll the rears to fit and pull the fronts to fit

Mods Waiting for Installation:ingalls rear camber kit

Future Mods and Plans:Direct port nitrous for this summer and a TSX 6-speed tranny next summer

Car History:2nd owner saw it for so cheap i couldn't say no

Pictures:

^^before I dropped it




i installed my double din in a way that has allowed me to keep the factory radio working with the 6 disk, am/fm radio as well as keep the steering wheel control :p

wish I had better pictures let me know what you guys think

[Milan]

Nice job fitting that 06-07 front and rear lip on your '03!  Care to share how you pulled your front fenders?

[fabulous010]

hey bwek great meet last night. good to see you on here. and please post pics of your double din. thats too clean to leave out

[Anonymous]

Welcome to the Elite.

[Mike]

Very nice ride...

[driveaccord]

Nice job fitting that 06-07 front and rear lip on your '03!  Care to share how you pulled your front fenders?

+1 on any info on pulling the fenders....good looking car

[Bwek]

for the front fenders i unclipped the wheel liner  and literally pulled on them with my hands just did it a little at a time till i had enough to clear the wheels its about 1/4" i pulled it out maybe abit more

the rear lip honestly doesn't fit bad i put mine on in below freezing temps so it lifted on the corners But before it did there were no gaps and it was perfect just gotta take your time with it

i was lucky enough my car came with a tape deck so i had the kit in my car already i wouldn't use anything but the oem kit it comes with some solid metal brackets to hold the unit the fitment is so so i guess it depends on which head unit you use but i have a small gap on each side of the unit

[MyNameIsThien]

Nice. May I ask how you got the 06-07 rear lip to fit on the 03-05 bumper?

[timot_one]

I like the 06-07 rear lip.  Makes me want to get one.

[Blackhawk]

Good job on the adaptations man. Clean car and welcome to the Elite.

[seththekorean]

Welcome to elite, nice silver coupe man.

[Bwek]

Nice. May I ask how you got the 06-07 rear lip to fit on the 03-05 bumper?

I installed the lower bolts first
then i peeled a tiny bit of the double sided tape so it was just above the lip
i then attached the center of the lip
went to ea corner lifted the corners and pulled the tape out
then put the screws in the sides took about 20 mins

[Bwek]

I like the 06-07 rear lip.  Makes me want to get one.

do it do it do it

to me it didn't matter cause i only paid $90 canadian for ea lip brand new so i figured why not try i haven't seen any other 7th gens nearly as low as mine it doesn't look dumped cause of the smallish wheels but i have trouble everywhere with scraping

I may be getting a prototyped header and catback for the 7th done on my car hopefully it goes through the company does top quality work

[k24low20z]

welcome to the site man, nice mods....

[Latin2nr]

Welcome to ECM Al, cool coupe.