anyone know a good place to get fenders rolled in Southern California?

Tim, thanks for the info. Looks like its time to roll the fenders...

So I think I found the problem. Jacked up the car and removed the wheel and inspected the wheel well at every possible angle. Looked inside and noticed that one of the bumper clips had shavings and one had fallen off. Was kind of greasy but not sure where its from, couldn't find a source.

Is it possible for me to rubbing on TL base wheels running 245/45/17? I'm set on the lowest perch all around.

Folks with the supercup kit please help out.

Thanks

Tim what I mention by the brake is the welded bracket that came with the shock on the driver side.

I'll definitely have to take the wheel out again and examine it carefully. Drove if again and thought I was rubbing a bit but that's not it.

Hopefully not a leaking strut but if that's the case I probably got one of the bad struts that was manufactured recently.

Update: just jacked up the car and didn't notice any oil spots by the shock. Will take the wheel off when I get home a do another check.

I'm hearing it on the driver side. But when I take off the wheel and and try to determine the cause can't find anything.

At first I same it was the brake bracket on the shock but i rotated it but still there. checked if it was the tire rubbing and couldn't be as i'm only running the TL base wheels.

I keep hearing a scraping/scratching sound every time a go over a big bump the freeway.

Any had these kind of issues before? Recently just installed the Neuspeed cupkit.

Could it be the brake bracket on the shock? I have it faced in word with the KONI logo pointing out words.

Thanks

Got my cup kit today.

When you did your install, did you have to cut the bump stop? Or was the OEM one just fine?

I'm planning to tackle this on the weekend.

Thanks

Just did a quick search and found no stand still shots, just rolling shots. I think I'll just purchase another set of TL wheels and have the current ones use as spares or put them on the wifes civic.

Thanks for the help.

Thanks Milan.

I only need one wheel but alot of people are willing to sell just one wheel.

If thats the case, I think I should get another set off wheels and sell the current ones.

Anyone have photos of TL-S wheels on a graphite pearl sedan?

Anyone know of a good wheel repair shop in southern califonia?

One of my TL wheels are bent and would like to get it fixed.

Any Pros and Cons of a repaired wheel?

Thanks.

I'm minutes away from ordering my Supercup kit from a local vendor.

What type of general hardware are you talking about? Are you referring to the top mounts?