What did you do to your Gen7 today?

[k24low20z]

installed my ss-p's today and ended up with one extra nut  ..other than being to low right it rides10000000000x better than my cheap springs on my blown ass struts

[timot_one]

Those are called bonus parts Alex.

[k24low20z]

lol yeah tim i know it was from up front driver side were i took off a buch of shit before knowing that i just had to unbolt my end liks for the swaybars.. atleast i got most of the parts in there some how..

[fatbastard]

Before you remove your rockers, make sure you zip tie them together so they don't move.
Like this:

Otherwise you'll lose one of these:

hey Tim thanks for the heads up! good thing i haven't started doing it yet!! 

[timot_one]

Alex, you don't need to remove your sway bar end links to swap out your suspension.  I've never had to do that.  If you take off the fork from the bottom of front strut, you'll have more room to fish everything out.  Do you know where the nut is supposed to go?  There should only be 6 nuts removed from each side in the front if you just take out the front strut/spring out.  It would only be 8 nuts if you remove both ends of the endlink.  I just hope it's nothing important that would cause damage or some sort of failure that would affect your handling.

[CrazyCreashunz]

Got my fogs installed into the bumper... looking nice and clean! Also painted the lower grille black, I didn't care for it being SSM honestly...

Ordered the black relay and gray relay from Honda today as well as yes I found a lip! It's redondo red but who cares, I got one for me and Elliot! So if anyone else is interested contact South Bay Honda online or call them @ 1877 475 1145 give them part #08F01-SDA-170 it's $212.40 plus S/H depending where it's going....  Hope this helps out some of you no0bz. Also if you have a redondo red accord and are ordering the lip   for not having to paint it like I do lmaoOooo  

[CYANiDE]

Got my fogs installed into the bumper... looking nice and clean! Also painted the lower grille black, I didn't care for it being SSM honestly...

Ordered the black relay and gray relay from Honda today as well as yes I found a lip! It's redondo red but who cares, I got one for me and Elliot! So if anyone else is interested contact South Bay Honda online or call them @ 1877 475 1145 give them part #08F01-SDA-170 it's $212.40 plus S/H depending where it's going....  Hope this helps out some of you no0bz. Also if you have a redondo red accord and are ordering the lip  for not having to paint it like I do lmaoOooo 

Damn that's expensive, but its better than $180 for a replica.

[sherker55]

Picked up new 3" K&N cone filter for my SRI by Paul

[Mike]

Changed my driver side sway bar end link... Swapped to my HFP silver stars. Scrubbed the shit out of my interior. Removed my fender liner to replace a parking light, and cleaned my AEM filter. Just waiting on that motor mount.

[cna]

Washed her today and found the rattling noise i had to be a lose bolt i used a magnet and a string it was located by my cabin air filter reinstalled it and bamm nice and quiet again

[CrazyCreashunz]

Installed a 04' TSX Intake Manifold with P2R gasket in Chino's (latin2nr) ride tonight. When I was done I washed mine again so i'm clean for the weekend to come.

Anxious to put on my new front end but I will wait until I can get this wiring situation figured out with the help of Tim...

[CrackerTeg]

Considered selling it thanks to the possibility of not getting paid.   

[thisaznboi88]

FX-R inside new housing... Then doing my brakes..

[timot_one]

I washed my summer wheels.  I'll probably take the time to put a coat of sealant and then wax tomorrow before I put them on my car.

[Rich01]

Started my spring cleaning yesterday. Wash, polish&wax. Restored my wheels with Klasse. Cleaned engine bay with black magic. Also did an oil change and rotate my wheels.on to the interior next weekend.