What did you do to your Gen7 today?

[B.R.03EX]

^^why was it a bitch? Wasn't it just a cable to your screen and power from reverse light?

*rear camber kit* haha sorry, I didn't catch that. Damn auto correct..

Both of my eccentric bolts were seized, I had to cut them out.

(original post edited)

[CrackerTeg]

^^why was it a bitch? Wasn't it just a cable to your screen and power from reverse light?

*rear camber kit* haha sorry, I didn't catch that. Damn auto correct..

Both of my eccentric bolts were seized, I had to cut them out.

(original post edited)

We warned ya.

[B.R.03EX]

We warned ya.

Yeah that's what I was thinking as I was trying to cut those damn bolts out. Luckily I took yours and Tim's advice and bought two replacements. It was such an awkward place to get a grinder or sawzall  in though. It took forever to cut.

[CrackerTeg]

Did you get replacement eccentrics or all new hardware to create a "lockout kit"?

[B.R.03EX]

Did you get replacement eccentrics or all new hardware to create a "lockout kit"?

I just bought replacement eccentrics. Just curious, what is a lockout kit?

[CrackerTeg]

Did you get replacement eccentrics or all new hardware to create a "lockout kit"?

I just bought replacement eccentrics. Just curious, what is a lockout kit?

DIY version:
http://www.6thgenaccord.com/forums/showthread.php?t=47260
The "professional" version:
http://www.z1motorsports.com/350_g35/product_info.php?products_id=5094

[Jeff Likes Bagels]

It's the square washers that make it "professionally" cost $65 extra.

[B.R.03EX]

Ahh, I gotcha now. That DIY lockout kit would have saved a few bucks. I'll keep that in mind if my toe goes out.

[CrackerTeg]

Ahh, I gotcha now. That DIY lockout kit would have saved a few bucks. I'll keep that in mind if my toe goes out.

I'd do it anyway tbh. Any Schmo doing your alignment will easily mistake your rear setup and go straight for the eccentrics to adjust your toe. It'll take you all of 20 minutes to do and you don't have to worry about it later.

[thisaznboi88]

waiting for my soldering iron and solder pump so i can desolder an IC on my TL ecu. Then off to the dealership to get it synced and FLASHPRO!

[Jeff Likes Bagels]

Ordered some Philips 9012 HIR bulbs to try and improve light output a little. Don't have the time or money to go with a retro, so these'll have to do.

[Rich01]

Got some parts in the mail today. Can't wait for next season, but I'll settle for next Friday for now lol

[olecram39]

Ordered some Philips 9012 HIR bulbs to try and improve light output a little. Don't have the time or money to go with a retro, so these'll have to do.

Your time i cant help you with, but you can do a retro for $100.

[Jeff Likes Bagels]

Ordered some Philips 9012 HIR bulbs to try and improve light output a little. Don't have the time or money to go with a retro, so these'll have to do.

Your time i cant help you with, but you can do a retro for $100.

I forgot about your budget retro thread. Looks like the $60 deal on Amazon is no longer. Oh well. If I find time over my winter break maybe I'll give this a shot, then throw the HIR bulbs into my sister's civic.

[olecram39]

Call James Wachs at Headlights Quick (www.headlightsquick.com) tell him you want the Amazon deal but that you cant find it anymore. He is the owner so he might be able to hook you up, but they have the same kit for $75 instead of $60 on the website. You can always get the same projectors with smaller shrouds, the mini gatling gun (no modification needed for our headlights) for $45.