What did you do to your Gen7 today?

[thisaznboi88]

cleaned replacement headlights in prep for retro... found a crack on driverside rear housing just near the highbeam hopefully I can just seal it up after and it will not affect anything. Gonna have to be real careful pulling it apart though

JB WELD IT! its only on the black plastic part right? Just JB WELD it inside and outside.

[CYANiDE]

Got my rear camber arms in finally. Then had to head to a shop for an alignment ASAP. Ended up spending a couple hundred more bucks to get my car how I wanted at the end, but I guess it comes with the territory of modding cars. 

[Armyguy239]

watched it gettin taped up for the sand down this morning.... they filled in the keyed up parts, and fixed the dents yesterday:)

[Fanitron]

JB WELD IT! its only on the black plastic part right? Just JB WELD it inside and outside.

Yes just the black housing on the back. I'm gonna JB Weld it once I have it apart and sand it smooth, probably won't even know it happened once it's done... problem is I hope it doesn't crack more when I try to pry it apart 

[thisaznboi88]

as long as it doesn't shatter your okay. crack is nothing. I fixed cracked ho using before for one of my customer with JB. he said it never leaked.

[CrackerTeg]

Got to NC the other day and hit my fenders with a fender roller. They were in need. Hitting the road again today.

[thisaznboi88]

need to get another rear alignment since firestone can't do it on my aftermarket camber kit... mother Fker rear toe is off by 2x what the max is. camber is almost 2* off what it should be...

[timot_one]

Firestone can do the alignment. They're just too lazy to do it. Go back and demand a refund for your lifetime alignment and they'll do it.

[thisaznboi88]

Will do. I wish Thien worked at this firestone. Then I can get custom specs.  >

[timot_one]

I've brow beat them into setting up my car the way I wanted it.  It's all about being persuasive.  At the Firestone I went to in MA, I didn't allow them to take advantage of the situation.  Yes, I was an asshole to them.  I went there a lot and I got them to align it to the specs I wanted.

[MyNameIsThien]

I took off my UR rear 4 point chassis brace, took off my j-pipe, took off my test pipe, took off my Endless BBK, installed stock j-pipe, installed stock 3rd cat, and installed 06 TL front calipers, pads, rotors, and SS lines.

 

[Fanitron]

I wanna pull my intake manifold cover to paint... but was wondering if I would need to get a replacement gasket for when it goes back on?

[status]

used turtle wax product thing to restore headlights, at first I thought I was fuckin shit up, but seems to have worked well.
 also cleaned out all the dirt and mold in the trunk water runoff nasty as hell.

[Mike]

If your car is a 6 you can reuse the gasket its metal just don't break it

[cna]

Paited my Cusco Type 2 Lower Front Arm Brace red and detailed her up