Front Shakes When Turning Hard

[slipkord]

Check your lug nuts, srsly, or suspension components

[Jeff Likes Bagels]

Check your lug nuts, srsly, or suspension components

I used a torque wrench and did them all at 80ftlbs last time

As far as NRG goes, I've heard of them making a damper for the v6 accords or something. I could probably email them and figure something out.

[timot_one]

Have your mounts and suspension checked Jeff.  Maybe even try to get a hold of Skippy since you're in his hood. 

As far as the ETD goes, I know Paul is working on that.  He's just really busy with other stuff right now.

[Jeff Likes Bagels]

For about $100 I can purchase the Ingalls brackets separately (which seems like a shitton).

http://www.ingallseng.com/93044-2-replacement-stiffy-engine-bracket.html

http://www.ingallseng.com/93041-3-replacement-stiffy-chassis-bracket.html

Just a thought that I could take the Ingalls brackets and put the 03 CL 6MT damper on them. But from the looks of the cost for the brackets, I may have to look for a different solution. I also didn't realize how many bends are in the brackets. It may be a little more difficult than I thought to make these brackets...

Oh well. Paul is way more experienced than I am, and I trust any of the work that he does. I'm sure that once he does get this finished, it will be top quality.

[CrackerTeg]

$100 is a shit ton considering I didn't pay too much more for mine used from Steve.

[timot_one]

That's a rip off.  You won't be abel to use the CL damper with them.  Be patient and there will be a solution eventually.