|
Title: Motor Mount Post by: super425 on June 11, 2013, 10:51:34 AM So I am looking into replace my motor mount. I want to see anyone have any suggestion for the mount from oem to poly mount. And I want to know where can I get the whole set front, rear, side, and other small mount.
Title: Re: Motor Mount Post by: timot_one on June 11, 2013, 12:23:08 PM I have Innovative mounts. You probably don't want anything stiffer than the 60a bushings for a stock motor. I have 75a in mine because the 85a's made my car shake like a massage chair.
Title: Re: Motor Mount Post by: super425 on June 11, 2013, 07:19:30 PM but the innovative mount is for v6 though. Is it interchangeable.
Title: Re: Re: Motor Mount Post by: accordguy04 on June 11, 2013, 07:20:50 PM They offer them for 4 cyl and 6 cyl.
Title: Re: Motor Mount Post by: super425 on June 11, 2013, 07:22:37 PM Can you give me the link cause I look into the website and it only available for v6
Title: Re: Motor Mount Post by: super425 on June 11, 2013, 07:48:14 PM http://www.innovativemounts.com/ProductDetails.asp?ProductCode=10751 (http://www.innovativemounts.com/ProductDetails.asp?ProductCode=10751)
Is this the one you guys talk about Title: Re: Motor Mount Post by: timot_one on June 11, 2013, 07:55:48 PM They are the same mounts they use for the TSX. I got mine from Heel Toe.
Title: Re: Motor Mount Post by: super425 on June 12, 2013, 10:59:46 AM thanks just order mine from heel toe.
Title: Re: Motor Mount Post by: super425 on June 24, 2013, 10:07:42 PM Alright I got my mount, try to install the side one but it not line up. Is your line up just like that or did you change little thing.
Title: Re: Motor Mount Post by: CrackerTeg on June 25, 2013, 09:08:24 AM Not sure I understand the question. Do you have a picture?
Title: Re: Motor Mount Post by: super425 on June 25, 2013, 12:34:39 PM My question is the side mount is not fit. If i line up the top 2 bolts, the bottom 2 is not in correct place.
Title: Re: Motor Mount Post by: timot_one on June 25, 2013, 04:59:44 PM Yeah. I ran into that too. I just elongated the bolt holes for the part of the mount that bolts to the chassis.
Title: Re: Motor Mount Post by: super425 on June 25, 2013, 06:26:56 PM Yeah but I think i cant do that cause it way off the line so i emailed Innovative already. And how is the vibration you have. Man my was so much specially sitting at idle with fan on. I want to see what other people review on this as i am consider going back to oem hydraulic mount
Title: Re: Motor Mount Post by: timot_one on June 26, 2013, 12:40:18 AM What stiffness bushings did you get? I have 75a, and there's still some vibrations. Of course, you can't expect to get polyurethane mounts and no vibration. I expect it, but I also am one of the few people on here that makes the kind of power that justifies stiffer mounts. For the people that have basic bolt ons, OEM Honda mounts are just fine if you expect to have comfort.
Title: Re: Motor Mount Post by: super425 on June 26, 2013, 01:22:39 AM I got 60a and at idle my whole dash shake like crazy. When I stop or the car drop to 5mph man that thing shake like no tomorrow.
Title: Re: Motor Mount Post by: ikethegreat on June 26, 2013, 07:28:48 AM So glad I decided not to get them myself. That would drive me freaking crazy.
Title: Re: Motor Mount Post by: HEcreated487 on June 26, 2013, 12:29:39 PM What stiffness bushings did you get? I have 75a, and there's still some vibrations. Of course, you can't expect to get polyurethane mounts and no vibration. I expect it, but I also am one of the few people on here that makes the kind of power that justifies stiffer mounts. For the people that have basic bolt ons, OEM Honda mounts are just fine if you expect to have comfort. This just confirmed that I should replace my worn mounts with OEM. Thanks Tim. Title: Re: Motor Mount Post by: super425 on August 08, 2013, 02:16:54 PM Innovative just send me the new base for the side mount and now everything is in and complete. Man i feel the different compare to the oem mount.
|