EliteCM.net

K Series Performance => Stock Motors, Transmissions, & Maintenance => Topic started by: MyNameIsThien on November 24, 2009, 12:24:52 AM



Title: How To: Oil Change [K24]
Post by: MyNameIsThien on November 24, 2009, 12:24:52 AM
Here will be a simple guide to doing an oil change on your 7th Gen Accord equipped with the K24 motor.

Tools:

17mm wrench or 17mm socket (six point prefered) and ratchet (your choice of 3/8 or 1/2)
Oil filter pliers or wrench
Rags
Funnel

(http://i35.photobucket.com/albums/d199/7thGenVillian/11232009155.jpg)

Start off by opening your hood and identifying your motor.

(http://i35.photobucket.com/albums/d199/7thGenVillian/11232009156.jpg)

Lift your car on either a lift, jacks, or however you would like to.

Find the Drain Plug.

(http://i35.photobucket.com/albums/d199/7thGenVillian/11232009140.jpg)

Loosen the drain plug with your wrench or ratchet and drain the oil.

(http://i35.photobucket.com/albums/d199/7thGenVillian/11232009146.jpg)
(http://i35.photobucket.com/albums/d199/7thGenVillian/11232009147.jpg)

Find the oil filter and use the pliers or wrench to take of the oil filter. Drain the oil filter.

(http://i35.photobucket.com/albums/d199/7thGenVillian/11232009141.jpg)
(http://i35.photobucket.com/albums/d199/7thGenVillian/11232009149.jpg)
(http://i35.photobucket.com/albums/d199/7thGenVillian/11232009150.jpg)
(http://i35.photobucket.com/albums/d199/7thGenVillian/11232009152.jpg)

Apply new oil to oil filter gasket. Hand thread the oil filter on and hand tighten the oil filter on.

(http://i35.photobucket.com/albums/d199/7thGenVillian/11232009153.jpg)
(http://i35.photobucket.com/albums/d199/7thGenVillian/11232009154.jpg)

Clean any excess oil spills and proceed to lower vehicle. Add your oil, and check your oil level.

(http://i35.photobucket.com/albums/d199/7thGenVillian/11232009158.jpg)

Clean up and call it a day. I hope this helps anyone who is doing an oil change on their Accord.


Title: Re: How To: Oil Change [K24]
Post by: timot_one on November 24, 2009, 08:03:23 AM
It sure helped me Thien!!


Title: Re: How To: Oil Change [K24]
Post by: CrackerTeg on November 24, 2009, 08:26:07 AM
Do I detect sarcasm Tim?

Anyway, this is good you post these up Thien. There's quite a few newbs out there that don't know a damn thing and this being one of the most basic of maintenance would be a huge help to them as well as a money saver.


Title: Re: How To: Oil Change [K24]
Post by: timot_one on November 24, 2009, 08:59:04 PM
Quote from: "CrackerTeg"
Do I detect sarcasm Tim?

Maybe a little bit.  You're right though.  This can help out some newbs.


Title: Re: How To: Oil Change [K24]
Post by: kriptix on February 10, 2010, 04:31:49 PM
nice post but what kind of Oil do you guys usually use?  I just got my accord 2.4L and was thinking should i do synthetic or blend


Title: Re: How To: Oil Change [K24]
Post by: slipkord on February 10, 2010, 04:35:09 PM
Try the search function first. And post up a profile too!


Title: Re: How To: Oil Change [K24]
Post by: Jeff Likes Bagels on August 29, 2010, 10:36:36 AM
Sorry for the thread bump, but i have a very simple question. For you guys running Purolator PureONE filters, how long do you go before switching it out? I plan on changing oil at 5k, and wasn't sure if the filter can handle two oil changes. Thanks.


Title: Re: How To: Oil Change [K24]
Post by: CrackerTeg on August 30, 2010, 05:32:52 AM
I do it at each oil change which I do at about 7500 miles of easy driving or 5k of hard driving.


TinyPortal © 2005-2012