|
Title: Clutch engagement adjustment Post by: Lemonjelly on January 10, 2012, 08:56:40 PM So I just had a new clutch put into my accord (5mt) and the clutch doesn't engage until the pedal is most of the way out. Is there any way to adjust where in the clutch pedal travel it engages? If so, how would I go about doing so?
Title: Re: Clutch engagement adjustment Post by: NVA-AV6 on January 10, 2012, 09:33:21 PM Follow the rod from the master cylinder to the pedal, there is a 12mm locking nut on the back of it. Losen that and twist the rod in and out until you get about 1" of pedal travel before you feel the resistance of the rode engauging the master cylinder piston. Also the pedal engaugement point wil move a bit as the clutch breaks in....
Title: Re: Clutch engagement adjustment Post by: timot_one on January 10, 2012, 11:21:24 PM Steve, if you need pictures of what to look for, I can take some for you. I have my master cylinder and pedal assembly out of my car right now.
Title: Re: Clutch engagement adjustment Post by: Lemonjelly on January 12, 2012, 09:12:31 AM Thanks for the info Paul, you're the man!
I should be all set Tim but if I run into problems I will def shoot you a text. |