thanks, Tim.

bumpy

The first is the screws that hold the trunk liner in towards the end:

It looks like it would be number 15 here:
http://www.hondaautomotiveparts.com/auto/jsp/mws/prddisplay.jsp?inputstate=5&catcgry1=ACCORD&catcgry2=2006&catcgry3=2DR+LX&catcgry4=KA5AT&catcgry5=REAR+TRAY+-+TRUNK+SIDE+GARNISH
But it doesn't exist on the list. It's definitely not 14, I tried.

Second is the little clip that goes inside the AT console for shifter unlock:

Doesn't seem to exist here:
http://www.hondaautomotiveparts.com/auto/jsp/mws/prddisplay.jsp?inputstate=5&catcgry1=ACCORD&catcgry2=2006&catcgry3=2DR+LX&catcgry4=KA5AT&catcgry5=CONSOLE

Anyone have any clue where I could possibly find these? Or am I gonna have to start rummaging junk yards?

EDIT: The passenger side seat recliner has been broken for a while also, I took off the plastic and noticed that the handle had simply just worn through:

So I tried looking for the part number for this and...
19 in this one looks like just the plastic part of the handle: http://www.hondaautomotiveparts.com/auto/jsp/mws/prddisplay.jsp?inputstate=5&catcgry1=ACCORD&catcgry2=2006&catcgry3=2DR+LX&catcgry4=KA5AT&catcgry5=FRONT+SEAT+%28R.%29

and this doesn't seem helpful either: http://www.hondaautomotiveparts.com/auto/jsp/mws/prddisplay.jsp?inputstate=5&catcgry1=ACCORD&catcgry2=2006&catcgry3=2DR+LX&catcgry4=KA5AT&catcgry5=FRONT+SEAT+COMPONENTS+%28R.%29+%282%29

EDIT EDIT: Is it possible that the actual metal part of the handle is part of the frame assembly?

 If that's the case, looks like I'm SOL.
EDIT EDIT EDIT: So I just squeezed the sheered parts that are shown together and it looks like a good temporary fix, I will eventually need that part though *sigh*

http://www.amazon.com/DC-Sports-HHS5022B-Polished-Stainless/dp/B000KBEA6E/ref=sr_1_3?ie=UTF8&qid=1453843572&sr=8-3&keywords=dc+sports+stainless+header

Btw the DC Sports header is ~$100 cheaper on Amazon compared to Ebay

thanks!

Do you guys know who still sells O2 sensor extenders? About to buy me a SS DC Sports header. Or would you suggest soldering/heatshrinking more wire to the thing myself?

"Hellastock" with rally armors 

Naw, they were regular bulbs. Figured it out though, a connection was loose in the actual bulb adapter.

I'm not sure what you mean by 'parking light'. When using the left turning signal, the bulb blinks, when using the hazards, the left bulb blinks. When pressing unlock, only the right bulb blinks. When turning headlights to the on position, the bulb of the right turning signal works, but the left does not turn on. I'm not sure if I'm being clear, enough, does that help?

So my turn signals work properly when the hazards are on or when indicating left or right. However, the left one does not function when pressing the lock or unlock buttons on the remote or when the headlights are turned on. I have checked my fuses, I've tried different bulbs. Any ideas on what it could be?

So I need to replace my motor mounts soon. Do I have any other options besides OEM at this point (For an i4)? I can't find anything on http://www.innovativemounts.com/SearchResults.asp?Cat=12